Download  Print this page


Table of Contents
Visual, Audio
1 beep
that repeats every
16 seconds
No Flow Alarm
This alarm occurs when
the device detects there is
no oxygen flowing in the
patient cannula�
Press the yellow Alarm
silence button on the
screen to temporarily
silence the alarm, and
the 2nd screen shown
at left appears� Or, press
the Home button on the
device to return to the
Home screen, and the 3rd
screen will appear with
the No Flow (NF) alarm
symbol in the upper left
corner to indicate the
alarm state�
Note: This alarm could
take up to 66 seconds to
activate from the time
the alarm condition is
SimplyGo Mini User Manual
What To Do
Check the cannula
for kinks or other
obstructions that
are stopping
oxygen flow
through it�
If alarm persists,
change to another
source of oxygen
and contact
your equipment



Table of Contents

   Also See for Philips Respironics SimplyGo Mini

Comments to this Manuals

Symbols: 0
Latest comments: