Download  Print this page


The alarm log is maintained between device Power Off and Power On
cycles (the time of Power Off is not logged)�
The most recent alarm events in the log from the current Power On
session may be lost if the device experiences a total loss of power and
improperly shuts down�
The alarm log maintains the most recent 16 alarms and will discard the
oldest data once its memory is full and a new alarm occurs� If less than 16
alarms have occurred, N/A will appear on some of the alarm screens�
Change the Language Selection Setting
To select a new language on the SimplyGo Mini device,
complete the following steps:
1� From the Home screen, click on the Tools icon to
access the Device Tools menu�
2� Press the page left or page right (< >) buttons
to scroll through the menus until the language
selection menu appears, shown at right�
3� Press the Language Selection icon, and then press
the up and down arrows (∧ ∨) to scroll through
the list until the desired language appears, as
shown below�
SimplyGo Mini User Manual



Table of Contents

   Also See for Philips Respironics SimplyGo Mini

Comments to this Manuals

Symbols: 0
Latest comments: