Download  Print this page

Charging The Battery With The Ac Power Supply - Philips Respironics SimplyGo Mini User Manual

Hide thumbs


SimplyGo Mini User Manual

Charging the Battery with the AC Power Supply

Important: The first time you charge the battery, be sure to charge it fully�
Do not use the DC power cord to do so; instead use AC power�
Note: The battery will begin charging whenever you connect the device to an
AC outlet, regardless of whether or not it is in use�
To charge the battery using the AC Power Cord provided with your system,
follow these steps�
Connect the AC Power Supply's output cable to the SimplyGo Mini
power input connector�
Connect the AC Power Cord's connector into the AC power supply�
Connect the AC Power Cord's plug into an AC outlet installed to meet
national or regional electrical code�
Note: The AC Power Supply is equipped with a green light, which illuminates
as soon as you connect the device to an energized AC power source�
When charging is complete (this takes four hours or less for the
standard battery), disconnect the AC Power Supply and store it with
the AC Power Cord for future use�
Note: Replacement and spare batteries are available separately� For
information, contact your equipment provider�
Note: An optional SimplyGo Mini Smart Battery Charger (sold separately)
is available for your system� For more information, contact your
equipment provider�



Table of Contents

   Also See for Philips Respironics SimplyGo Mini

Comments to this Manuals

Symbols: 0
Latest comments: