Page 2
20/20i Installation ™ ➋ ➊ Instructions These installation instructions are for the GHS 20 and GHS 20i handsets. The GHS 20 ➍ ➌ is for use with the Garmin VHF 200 or 300 ® radio and the GHS 20i is for use with the Garmin VHF 200i or 300i radio.
Page 3
GWH 20 temperature (page 7). and the GHS 20. Test the location to make • Fast blink (6 blinks/second)—The battery sure the GWH 20 reliably communicates cannot charge, and must be replaced.
Page 4
5. Route the GWH 20 cable to the paired. VHF 200/200i or the VHF 300/300i. 6. Perform an action: 1. Turn on all of the GHS 20/20i handsets you want to pair. • On a VHF 200/200i, connect the GWH 20 cable to the microphone 2.
VHF 300/300i, select MENU > COMMUNICATIONS > Pairing Troubleshooting CONNECTIONS > [Device Name] > If you are not able to pair a GHS 20/20i NAME. handset with the GWH 20, complete these 2. Enter all the letters in the new name steps.
Page 6
1. On the VHF 200/200i or on the Speci ication Measurement primary VHF 300/300i (STATION 1) GHS 20/20i GWH 328 ft. (100 m), GHS 10/10i handset, select MENU > 20 maximum depending on COMMUNICATIONS > transmission installation CONNECTIONS > [Device Name] > distance location (page 4) DISCONNECT.