Preparation For Recording; One Touch Recording; Cd Synchronised Start Recording; Dubbing Tapes - Philips FW-M355 Manual

Mp3-cd mini hi-fi system
Hide thumbs Also See for FW-M355:
Table of Contents

Advertisement

Tape Operation / Recording

Preparation for recording

1
Press TAPE to select tape deck 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
starts flashing.
REC
It is not possible to listen to another source,
except tape dubbing.
It is not possible to activate the timer function
during recording or tape dubbing.

One touch recording

1
Press CD 1/2/3, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" will be displayed.

CD Synchronised start recording

1
Press CD 1/2/3 to select the disc.
Press í or ë to select the desired track to
start recording.
You can programme the tracks in the order you
want them to be recorded (refer to "CD/MP3-
CD Operations - Programming the disc tracks").
2
Press RECORD to start recording.
The disc will start playback automatically.
24
pg 001-030/M355/22-Eng
To select another track during recording
1
PressÉ Å to interrupt recording.
2
Pressí or ë to select the desired track.
3
PressÉ Å again to resume recording.
To stop recording
Press Ç.
Recording and disc playback will stop
simultaneously.

Dubbing tapes

1
Press TAPE to select tape mode.
2
Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
3
Press RECORD.
Playing and recording will start simultaneously.
"DUB" is displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
Press Ç.
Notes:
– Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of the same
length.
24
3139 115 21422
4/17/02, 10:37 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw-m355/34Fw-m355/30Fw-m355/21Fw-m355/33

Table of Contents