Erasing The Programme - Philips FW-M355 Manual

CD/MP3-CD Operations
5
Press PROG to store the track.
Repeat steps 3–5 to store other discs and
tracks.
6
To end programming, press Ç once.
stays and the programme mode
PROG
remains active.
The total number of tracks programmed and
the total playing time are displayed.
For MP3 disc, total playing time will not be
shown.
7
To start programme play, pressÉ Å .
"PLAY PROGRAM" is displayed.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total
playing time.
– If you attempt to programme more than 99
tracks, "FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
To review the programme
Stop playback and pressí or ë repeatedly.
To exit review mode, press Ç.
18
pg 001-030/M355/22-Eng

Erasing the programme

Press Ç once when playback is stopped or
twice during playback.
PROG
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to "Tape
Operation/Recording".
18
disappears and "PROGRAM CLEARED"
3139 115 21422
4/17/02, 10:36 AM