SPA9300_QSG_Single_EN.qxd
08-12-2005
15:27
Pagina 1
1
Connect
3
2
REMOTE
SPEAKER
CONTROL
PC
BASS
CONTROL
R
POWER
4
AC
1
1. Connect the satellites to the SPEAKER OUT port of the subwoofer.
2. Connect the black plug of the wired remote control to the REMOTE CONTROL port of the
subwoofer.
3. Connect the green plug of the wired remote control to the corresponding port of your audio
source (for example, your computer).
4. Connect the power cable of the subwoofer to a power supply.
2
Enjoy
3
1
POWER
BASS
CONTROL
1. Push the POWER button on the wired remote control to turn on the multimedia speakers.
> The blue light on the wired remote control comes on.
2. Make sure that your audio source is correctly configured.
3. Adjust the bass level with the BASS CONTROL control on the rear of the subwoofer.
4. Adjust the volume level with the VOLUME control on the wired remote control.
> You can now enjoy the sound of your multimedia speakers.
5. You can connect an auxiliary audio source to the wired remote control.
> The sound of the auxiliary audio source is sent to the multimedia speakers.
OUT
L
5
MP3
4
POWER
Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.
Need help?
Online help: www.philips.com/support
Helpline
United Kingdom
0906 1010 016 (£ 0.15)
Specifications are subject to change without notice.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
312 247 501 062
Multimedia Speakers
Welcome
Quick start guide
SPA9300
1
Connect
2
Enjoy