Tanning With Creams; Before You Use Your Lumea; Pretreating Your Skin; Skin Test - Philips Lumea SC2009 User Manual

Ipl cordless hair removal device
Hide thumbs Also See for Lumea SC2009:
Table of Contents

Advertisement

Available languages

Available languages

16
English

Tanning with creams

Before you use your Lumea

Pretreating your skin

Skin test

If you have used an artificial tanning lotion, wait until the artificial tan has
disappeared completely before you use the device.
Before you use Lumea, you should pretreat your skin by removing hairs
on the surface of your skin. This allows the light to be absorbed by the
hair parts below the skin surface to ensure effective treatment. You can
either shave, short-trim, epilate or wax. Do not use depilatory creams, as
chemicals may cause skin reactions.
If you choose to wax, please wait 24 hours before using Lumea to
let your skin rest. We recommend that you take a shower before the
treatment to ensure that all possible residue of wax has been removed
from your skin.
1
Pretreat the areas you intend to treat with Lumea.
2 Clean your skin and make sure it is hair-free, entirely dry and free
from oily substances.
Note: Once the hairs stop growing back, which usually happens after
4-5 treatments, you no longer have to pretreat your skin before you use
the device.
When you use Lumea for the first time or after recent tanning, perform a
skin test on each area to be treated. The skin test is necessary to check your
skin's reaction to the treatment and to determine the correct light intensity
setting for each body area.
1
Choose an area close to the area you intend to treat.
2 Switch on the device. Make sure you select setting 1.
3 Put the device against your skin and press the flash button to release
a flash.
4 Slide the device over the skin to the next area to be treated.
5 Increase the setting by one level, apply a flash and slide the device to
the next area. Repeat this for all levels within the recommended range
for your skin type.
6 After the skin test, wait 24 hours and check your skin for any reaction.
If your skin shows reactions, choose the highest setting that did not
result in any skin reaction for subsequent use. The skin test should be
performed in all the areas you want to treat.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumea sc2007

Table of Contents