Contact Inputs; Virtual Inputs; Remote Inputs - GE C30 Instruction Manual

6 ACTUAL VALUES
6.2STATUS

PATH: ACTUAL VALUES STATUS
 CONTACT INPUTS

MESSAGE
MESSAGE
The present status of the contact inputs is shown here. The first line of a message display indicates the ID of the contact
input. For example, 'Cont Ip 1' refers to the contact input in terms of the default name-array index. The second line of the
display indicates the logic state of the contact input.

PATH: ACTUAL VALUES STATUS
 VIRTUAL INPUTS

MESSAGE
MESSAGE
The present status of the 64 virtual inputs is shown here. The first line of a message display indicates the ID of the virtual
input. For example, 'Virt Ip 1' refers to the virtual input in terms of the default name. The second line of the display indicates
the logic state of the virtual input.

PATH: ACTUAL VALUES STATUS
 REMOTE INPUTS

MESSAGE
MESSAGE
The present state of the 64 remote inputs is shown here.
The state displayed will be that of the remote point unless the remote device has been established to be "Offline" in which
case the value shown is the programmed default state for the remote input.
GE Multilin


CONTACT INPUTS

Cont Ip 1
Off
Cont Ip 2
Off
↓
Cont Ip xx
Off


VIRTUAL INPUTS

Virt Ip 1
Off
Virt Ip 2
Off
↓
Virt Ip 64
Off


REMOTE INPUTS

REMOTE INPUT 1
STATUS: Off
REMOTE INPUT 2
STATUS: Off
↓
REMOTE INPUT 64
STATUS: Off
C30 Controller System
6.2.1 CONTACT INPUTS
Range: On, Off
Range: On, Off
Range: On, Off
6.2.2 VIRTUAL INPUTS
Range: On, Off
Range: On, Off
Range: On, Off
6.2.3 REMOTE INPUTS
Range: On, Off
Range: On, Off
Range: On, Off
6.2 STATUS
6
6-3