Industry Canada Statement; Règlement D'industry Canada; Wireless Disclaimer; Avis De Non-Responsabilité Concernant Les Appareils Sans Fil - Cisco Linksys AE1200 User Manual

Linksys AE1200/AE2500
The radio wave exposure guidelines use a unit of
measurement known as the Specific Absorption Rate, or
SAR The SAR limit for mobile devices is 1 6 W/kg
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest
certified power level in all tested frequency bands The
highest SAR values under the FCC and Industry Canada
guidelines for this device model are:
Maximum SAR for this model and conditions under
which it was recorded
Type of
Target Freq
Exposure
SAR (Whole WLAN 2 4
body) GHz
SAR (Whole WLAN 5 0
body) GHz
During use, the actual SAR values for this device are
usually well below the values stated above This is because,
for purposes of system efficiency and to minimize
interference on the network, the operating power of your
mobile device is automatically decreased when full power
is not needed for the transmission The lower the power
output of the device, the lower its SAR value
Body SAR testing has been carried out at a separation
distance of x xx cm To meet RF exposure guidelines during
0.5
operation, the device should be x xx cm positioned at least
this distance away from the body If you are not using an
approved accessory ensure that whatever product is used
is free of any metal and that it positions the mobile device
indicated distance away from the body

Industry Canada Statement

This Class B digital apparatus complies with Canadian
ICES-003
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada
This device complies with RSS-210 of the Industry Canada
Rules Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation
Règlement d'Industry Canada
Les conditions de fonctionnement sont sujettes à deux
conditions:
1 Ce périphérique ne doit pas causer d'interférence et
2 Ce périphérique doit accepter toute interférence, y
compris les interférences pouvant perturber le bon
fonctionnement de ce périphérique
High Performance Wireless-N USB Adapter
Value W/kg Limit W/kg
1.03
xx xx 1 6
xx xx 1 6
1.13
0.5
Regulatory Information
IMPORTANT NOTE
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment End users must
maintain xx xx cm distance away from the USB device
0.5 cm
Please refer to the specific SAR information for further
detail
REMARQUE IMPORTANTE
Exposition aux radiofréquences :
Ce matériel est conforme aux limites d'exposition aux
radiofréquences établies pour un environnement non
contrôlé Pour assurer le maintien de cette conformité,
l'utilisateur doit suivre les consignes d'utilisation décrites
dans le présent manuel

Wireless Disclaimer

The maximum performance for wireless is derived from
IEEE Standard 802 11 specifications Actual performance
can vary, including lower wireless network capacity,
data throughput rate, range and coverage Performance
depends on many factors, conditions and variables,
including distance from the access point, volume of
network traffic, building materials and construction,
operating system used, mix of wireless products used,
interference and other adverse conditions
Avis de non-responsabilité concernant
les appareils sans fil
Les performances maximales pour les réseaux sans fil
sont tirées des spécifications de la norme IEEE 802 11
Les performances réelles peuvent varier, notamment
en fonction de la capacité du réseau sans fil, du débit
de la transmission de données, de la portée et de la
couverture Les performances dépendent de facteurs,
conditions et variables multiples, en particulier de la
distance par rapport au point d'accès, du volume du trafic
réseau, des matériaux utilisés dans le bâtiment et du
type de construction, du système d'exploitation et de la
combinaison de produits sans fil utilisés, des interférences
et de toute autre condition défavorable
For operation within 5.15 ~ 5.25GHz frequency range, it is
restricted to indoor environment.
31