Installation - Electrolux EKI64500OX User Manual

30 www.electrolux.com
Problem
It takes too long to cook
the dishes or they cook too
quickly.
The display shows an error
code that is not in this ta‐
ble.
The display shows "12.00". There was a power cut.
You cannot activate or op‐
erate the oven. The display
shows "400" and an acous‐
tic signal sounds.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to Safety chapters.
14.1 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
For minimal distances for fitting check
the table.
Possible cause
The temperature is too low
or too high.
There is an electrical fault.
The oven is incorrectly
connected to an electrical
supply.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Deactivate the oven with
the house fuse or the safe‐
ty switch in the fuse box
and activate it again.
If the display shows the er‐
ror code again, contact the
Customer Care Depart‐
ment.
Reset the clock.
Check if the oven is cor‐
rectly connected to the
electrical supply (refer to
the connection diagram if
available).
B
A
C