Disassembly For Repair - Kenwood RXD-M65V-H Service Manual

RXD-M65V-H/M65V-N
How to open the CD tray when it does not come out.
1. Insert a flat driver in to a square hole on the mechanism as shown in
the figure.
2. Push a rack gear in the direction of arrow.
(At this time, the tray comes out slightly frontward.)
3. The tray can be opened by hand.
How to Adjust the Azimuth of the REC/PLAY Head
(To adjust the azimuth adjustment screws, it is necessary to
remove the front glass.)
1. Insert a screw driver into a hole on display board as shown in
the drawing. (Fig.1)
2. Push a driver frontward. (Fig.1)
3. Remove a front glass. (Fig.2)
4. Adjust the azimuth adjustment screws. (Fig.3)
* Replace a front glass if scratched.
4

DISASSEMBLY FOR REPAIR

Fig.2
DECK BOARD
REAR VIEW
REVERSE
DISPLAY BOARD
Cushion
(not supplied)
Fig.1
FORWARD
Fig.3