Contents Overview Control and display elements Your Wireless TV Link Safety Installation Operation Enjoy your Wireless TV Link Troubleshooting Information Health and safety Maintenance and service Recycling and disposal Warranty Glossary Page...
Overview Control and display elements A Receiver 1 On/off switch 2 Power light > red: standby > green: on > blinking: remote control signalling 3 Source selector buttons (+/-) > in combination with the SLV5400 transmitter 4 Integrated remote control blaster light 5 Antenna 6 Wireless channel selection switch 7 SCART port for TV2...
• Do not expose the product to extreme heat. • In case of technical difficulties, do not open the product. Bring it to your Philips dealer. • Do not cover the product. • Connect the power adapters only to a 220-240 V AC/50 Hz power supply.
DC 12V Channel 1 2 3 4 CHANNEL Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Remove interference on TV3 1 Find the CHANNEL switch on the transmitter. 2 Check the setting of the CHANNEL switch. 3 Find the CHANNEL switch on the receiver (A).
Page 7
Operation Watch a cable TV program on TV3 Your VCR or DVD recorder needs to be connected to the transmitter (A) of the Wireless TV Link and connected to the Cable-TV signal. 1 Switch on the transmitter. 2 Switch on the VCR or DVD recorder. SELECT STANDBY 3 Take the remote control of the VCR or DVD...
Troubleshooting Problem • No image or wrong Make sure SCART cables are firmly inserted. image on TV3 • Make sure the receiver (A) is connected to TV3. • Make sure both receiver (A) and transmitter are switched on. • Make sure the video source is switched on.
Page 9
Troubleshooting Problem • The video sources Point the remote control directly to the receiver (A). do not respond to • Replace the batteries of the the remote remote controls with new ones. control commands • Install the remote control blaster from TV3 cord.
Information Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image.
Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer.
Page 12
AQ95-56F-614KR (report No.) EC DECLARATION OF CONFORMITY We , Philips Consumer Electronics B.V., P&A CC: Building SBP6 P.O.Box 80002, 5600 JB Eindhoven, The Netherlands declare under our responsibility that the electrical product: Philips (name) to which this declaration relates is in conformity with the following standards: EN 300 220-1 v1.3.1...