Table of Contents
Advertisement
Select Record to transcribe current call content. When you are transcribing, the menu changes to Stop
recording, select this menu to stop recording.
Select Mute to pause voice of current talking, at this time you can hear the voice of other side, but it can
not hear your voice, which facilitates you to talk with other local person to during the talking. The menu
changes to Unmute, select this menu to return to normal talking;.
Select Switch to BT: talk with BT earphone. After selecting "switch to BT" ,this menu changes to
"switch to phone"
Select New call to make the second phone call, or press number keys to make a new call during the
talking, then press Send key to dial out phone;
Select Phonebook to enter phone book screen, and implement the corresponding operation, which
facilitates to search a phone number during the dialing;
Select Create SMS to enter new short message screen and complete the corresponding operation (refer
to section 8.2.1).
When dialing the extension, after hearing the prompt voice of the other side, directly dial the extension
number, and only extension number displays on the screen. When extension dialing completed, tap Back to
display the number of switchboard.
During the talking, tap Handfree to talk in speak，at this moment, Handfree becomes Receiver，tap
Receiver to resume the normal talking。
2.4.1
Adjust volume
Press side up/down key to increase or decrease the receiver volume. The key position refers to the
picture within section 1.5。
2.4.2
Reject the call
Press Pwr key to end the call. After the rejection, the duration of talking will display.
2.4.3
New message
During the dialing phone, if there is new message, the phone will have prompt voice to remind you.
2.4.4
Answer the new call
Refer to section 2.3 for the operation and content of answering the call, the different point is that after
answering a new call, the previous call will keep hold. The previous talking can be activated by tap Active,
and the new call will keep hold. Refer to section 2.4.5 for operation about answering two calls
simultaneously.
2.4.5
Answering two calls simultaneously
When answering two calls, the current talking number displays at the first line, the other call will keep
hold; two calls can be switched by tapping Active. or Hold
When the second call is active, activate Option and implement the following functions: Switch,End,
End all, Record, Mute ,
Switch to
Select switch to switch communication;
Select End to reject current talking, so does press Pwr key;
Select End all to reject all talking;
Select Record to dial operation , the phone will record automatically once call connected, so does
BT, Conference (related with SIM card), Phonebook and Create SMS.
N5106 User manual
Page 27
Advertisement
Table of Contents
