SMART Fortwo 2015 Owner's Manual page 125

Y
6 Fuel level (
C
eco score display (
D
Reserve fuel display (
b Brake lamp failure warning lamp
E
Y
( page 132)
Total distance recorder
F
V Cruise control (
G
È Limiter
Vehicles with automatic transmission
Y
Time ( page 124)
:
Y
Drive program (
;
u Gearshift recommendation
=
Y
( page 102)
Transmission display
?
h Standard display or
= Gear indicator (manual mode)
S Transmission malfunction
Y
( page 104)
¤ Lane Keeping Assist indicator lamp
A
Y
( page 118)
Outside temperature display
B
Y
( page 120)
Y
Trip meter ( page 123)
C
Current fuel consumption (
Y
Service display (
Restarts the tyre pressure monitor
D
Y
( page 205)
Y
6 Fuel level (
E
eco score display (
F
Reserve fuel display (
b Brake lamp failure warning lamp
G
Y
( page 132)
Total distance recorder
H
V Cruise control (
I
È Limiter
page 121)
Y
page 109)
Y
page 121)
Y
page 113)
page 100)
Y
page 124)
page 175)
page 121)
Y
page 109)
Y
page 121)
Y
page 113)
Displays and operation
Menus and multi-displays
Overview
The arrangement of the menus and displays
can be envisaged as a circle.
X
To scroll: repeatedly press the ´ button
on the multifunction lever.
The menu functions/displays are shown one
after the other.
i If the ´ button is pressed and held for
approximately 3 seconds, the trip meter
appears directly on the display.
Depending on the vehicle equipment, you can
call up the following menus/displays one
after the other:
display and reset the trip meter
R
Y
( page 123)
display the current fuel consumption
R
Y
( page 124)
display the service due date (
R
set the time menu (
R
Restarting the tyre pressure monitor
R
Y
( page 205)
Resetting values
You can reset the trip meter data and the eco
Y
score display ( page 109). You can only reset
the eco score if the display is showing the
current fuel consumption.
X
Repeatedly press the ´ button on the
multifunction lever until the display shows
the trip meter data or the current fuel con-
sumption.
X
Press and hold the b button on the mul-
tifunction lever.
The trip meter value or the eco score dis-
play flashes for approx. 3 seconds. The data
is then reset.
The count in the eco score display only
reappears once a distance of approx. 400 m
has been covered. If the ignition remains
switched off for longer than four hours, the
eco score display in the on-board computer
will be automatically reset.
X
When the value has been reset, release the
b button.
If you release the b button earlier, the
data shown will not change.
Y
page 175)
Y
page 124)
Z
123