Safety Installations; Release Button - Kärcher SV 7 Operating Instructions Manual

Hide thumbs Also See for SV 7:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 19
Do not suck in burning or
glowing objects such as ciga-
rette buds, ash or other burn-
ing or glowing materials.
Should the appliance fall
down, it must be check by an
authorised after sales service
as internal disturbances
could be present, which con-
strain the safety of the prod-
uct.
CAUTION
Make sure that the power ca-
ble or extension cables are
not damaged by running
over, pinching, dragging or
similar. Protect the power ca-
ble from heat, oil, and sharp
edges.
Always switch off the ma-
chine and remove the plug
while filling the machine with
water.
Never fill solvents, solvent-
containing liquids or undiluted
acids (e.g. detergents, ben-
zene, paint thinner, and ace-
tone) into the water reservoir
as these substances affect
the materials used on the ap-
pliance.
The appliance must provide
of a stable ground.
Do not place the machine on
heat-sensitive surfaces.
Do not place the machine in
the vicinity of swtich-on
stoves, electrical ovens or
other sources of heat.
22
Press the switches lightly and
avoid using sharp objects
such as pins, pens/pencils
and similar objects.
Use and store the unit only in
accordance with the specifi-
cations in the description and/
or figure.
The steam switch must not be
locked during the operation.
Please switch off the machine
first using the main switch be-
fore disconnecting the ma-
chine from the mains.
To separate the machine
from the mains, pull the plug
and not the power cord.
Never wind the main cable
around the machine, definite-
ly not till the machine is still
hot.
Protect the appliance from
rain. Do not store outside.

Safety installations

Safety devices serve for the protection of
the user and must not be put out of opera-
tion or bypassed with respect to their func-
tion.

Release button

 The handle on the steam suction hose
is equipped with a release button, which
prevents accidental steam release.
 In the event that the steam suction hose
is shortly unattended during operation,
it is recommended to activate the re-
lease button (push the stop button).
 In order to trigger the steam release
again, deactivate the release button
(push the stop button again).
– 8
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents