Plasma Duo - Mitsubishi Electric MSZ-FA25VA Operating Instructions Manual

Indoor unit
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
To change the air flow direction not to blow directly onto your body.
To change the air
When to use this function?
flow direction
Pressing and holding
Use this function if you don't
VANE
want the air from the indoor-
the
button for
unit to blow directly onto your
2 seconds or more
body.
causes the horizontal
• Depending on the shape of
vane to reverse and
the room, the air may blow
move to horizontal
directly onto your body.
position.
VANE
• Press the
button again
to return the vane to the
previously-set position.
Horizontal position
NOTE:
If you make the air flow not to blow directly onto your body by pressing
3 minutes even during the operation of the air conditioner.
The air conditioner operates with decreased air flow until the compressor turns on again.
To change the AIR FLOW blowing direction horizontally, press the
Each time the button is pressed, the angle of the VERTICAL VANE is changed in sequence:
SWING OPERATION
Use the swing operation for the air flow to reach all corners of the room.
10
COOL/DRY
HEAT
The air conditioner starts the cool-
The air conditioner starts heating
ing or drying operation approx. 3
operation approx. 3 minutes after
minutes after the vane has moved
the vane has moved to the horizon-
to the horizontal position.
tal position.
• Sometimes the area around
VANE
• When the
button is
your feet may not warm. To warn
pressed again, the vane returns
the area around the feet, set the
to the previously set position and
horizontal vane to
the air conditioner starts the
the downward blowing position.
cooling or drying operation in
VANE
• When the
button is pressed
approx. 3 minutes.
again, the vane returns to the
previously-set position and the air
conditioner starts heating opera
tion in approx. 3 minutes.
VANE
button, the compressor stops for
button.
(SWING)
PLASMA DUO... PLASMA DEODORIZING & PLASMA
AIR PURIFYING
Use the PLASMA operation when you want to remove odor (cigarette smell, etc.) or clean the air (get rid of dust, pollens or
other allergens) inside the room.
(AUTO) or
Description of PLASMA operation:
function>
Both PLASMA DEODORIZING and PLASMA AIR PURIFY-
ING operation works.
function>
The PLASMA DEODORIZING operation cleans the air
inside the room by adsorbing and decomposing the particles
of odor-releasing substances and gases such as formalde-
hyde.
function>
The PLASMA AIR PURIFYING operation cleans the air in-
side the room by adsorbing the particles of cigarette smoke
or allergens such as pollens and house dust.
NOTE:
• Carbon monoxide released from cigarettes cannot be
removed by PLASMA operation. Open the windows to
let the outside air in from time to time.
• During PLASMA operation, you may smell ozone
that is generated in small quantities from the PLASMA
DEODORIZING/AIR PURIFYING filter units. This is
not a malfunction.
• You may hear a small "hissing" sound during PLASMA
operation. This is the sound of plasma discharge, and
not a malfunction.
To start PLASMA operation:
Select the operation mode of PLASMA by pressing the
button during the operation of air conditioner.
Each time this button is pressed, the operation mode of PLASMA is changed
in sequence:
Cancel (The sign of PLASMA operation disappears.)
PLASMA/WASH lamp turns on in the display section of the indoor unit and
PLASMA DEODORIZING and/or PLASMA AIR PURIFYING unit is energyzed.
Adjust the air flow to your desired speed.
To start PLASMA operation:
Select the "Cencel" by pressing the
operation of the air conditioner.
Once the PLASMA operation is selected, PLASMA operation will be performed
every time the air conditioner is turned on until the "Cancel" is selected with
the
button.
Never touch the PLASMA DEODORIZING/AIR
PURIFYING filter units during the operation of the
air conditioner. Although the filter units are safety-
conscious design, touching the units could be the
cause of trouble as they discharge high voltage
electricity.
<Cleaning>
When the PLASMA/WASH lamp blinks, please clean the
PLASMA DEODORIZING/AIR PURIFYING filter units.
Please refer to page 13 for the cleaning instructions.
<Replacing the PLASMA DEODORIZING filter>
* Refer to "REPLACEMENT OF THE PLASMA
DEODORIZING FILTER..." on page 13.
button during the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msz-fa35va

Table of Contents