Table of Contents
Advertisement
CONNECTING THE TV
WARNING! ENSURE THE TV AND ALL ANCILLARY EQUIPMENT IS UNPLUGGED
FROM THE MAINS BEFORE MAKING ANY CONNECTIONS!
Connecting the TV antenna
Connect the TV antenna to the aerial socket with a 75Ohm co-
axial plug. For best results use a high gain TV aerial, preferably
roof or loft mounted.
Connecting external devices
The Quick Start Guide shows the simplest and most effective way
of connecting your TV to ancillary equipment. Alternate methods
are listed below.
Note: The TV will connect through the HDMI cable by default.
Only use the HDMI cable and one other option.
Connecting more than one option may cause interference.
HDMI lead
You can connect this TV to a compatible device using a HDMI
lead. This method will give the best picture.
SCART lead
You can connect this TV to a compatible device using a SCART
lead. The connection uses component video signals, i.e. the red,
green and blue (RGB) content of the video are sent on separate
signals.
VGA cable
You can use your TV as a monitor for your personal computer by using a VGA cable. Sound from
your personal computer may also be played through the TV. This requires the audio output of the
personal computer to be connected to the AUDIO IN connection of the TV.
S-VIDEO lead
You can connect this TV to a compatible device using an S-VIDEO lead.
Component Input (YPbPr cables)
You can connect this TV to a compatible device using YPbPr cables. Connect the red, green and
blue outputs to the matching coloured inputs on the compatible device. An additional audio input
is required.
10
LCD19HDID-407W.indd Sec1:10
LCD19HDID-407W.indd Sec1:10
LCD TV Receiver LCD19HDID-407W
VIDEO OUT / DIGITAL AUDIO OUT
14/11/2007 16:01:03
14/11/2007 16:01:03
Advertisement
Table of Contents
