taneously. There are now six sound engines and two instances of each
effects unit available for use within one program.
With both panels active, one of the panel button LEDs will flash, indi-
cating which panel is focused for editing. To switch edit focus press the
corresponding panel button. To disable one panel, and return to a single
panel setup, hold the button of the panel that should be kept and press
the other one.
moNITor/CoPY PaNEL/PaSTE
To display what a parameter on the panel is set to, with-
out changing it, hold down the MONITOR button and turn
the associated parameter knob.
Pressing COPY PANEL and the PANEL A or B button will
copy all settings on that panel. These can then be pasted to the other
panel within the current program, or to a panel in a different program.
To paste the settings, press PASTE (Shift + monitor/Copy Panel) and the
button for the panel the settings should be pasted into.
moNo oUT
Enable MONO OUT (Shift + Panel a button) to set the out-
puts of the Stage 3 sound sources and effects to mono.
This is a global setting which will affect all programs until
it is deactivated or the Nord Stage 3 is turned off.
DUaL KB
The DUAL KB feature allows for playing and controlling Panel B from an
external mIDI keyboard, connected to the mIDI Input of the Nord Stage
3.
The Stage 3 keyboard now controls Panel a while the external keyboard
controls Panel B. Note that the sounds on Panel B are not accessible
from the Stage 3 keyboard while in Dual KB mode. This feature is very
handy in live situations, where a secondary keyboard can be used as a
controller for Panel B of the Nord Stage 3, on a per-program basis.
another advantage with the Dual KB mode is that all parameter controls
for either panel are accessible from the Nord Stage 3. as an example,
the drawbar settings on Panel B - played from the external keyboard -
can be adjusted simultaneously as the sound on Panel a is being played
from the Stage 3 keyboard.
The Dual KB setting is stored with a Program, along with all other Panel
settings.
M
The MIDI Channel for the Dual KB feature is set in the MIDI Menu
on the Stage 3. Read more on this on page 54.
SHIFT / EXIT BUTToN
many buttons - and some knobs - have a secondary function
which is accessed by holding SHIFT and pressing the button
or turning the knob. Shift activated functions are always print-
ed below the corresponding control. For example, holding
Shift and pressing the Program 3 button will open up the mIDI
menu.
The Shift button is also used to EXIT menus, or for cancelling Store
operations.