Download Print this page

Philips Voice Tracer VTR7000 User Manual page 69

Advertisement

9 9 9 9 Wireless
Wireless
Wireless
Wireless Mode
Select Wireless Mode on the main interface, press MENU to enter.
There are two built-in frequency bands available in the system. Please
set the device's working band and the working band of the wireless
microphone to the same band, for example: if the device's working
band is set at BAND 1, then the wireless microphone's working band
has to be set at BAND 1 too. If the bands don't match, the device
cannot record sound from the wireless microphone.
Wireless reception interface picture as follows:
Note:
Note:
Note:
Note: please plug in the earphones. They allow radio reception.
Sound can only be heard in the earphones.
On this interface, press "
band is set, press "PLAY" button to enter recording mode through
wireless reception. In order to start wireless recording, the wireless
microphone must be working on the same band with the device. See
the below interface picture of Wireless Mode:
Mode
Mode
Mode
BAND 1
" or "
" to switch band. After the
69
BAND 2

Hide quick links:

Advertisement

loading