Download  Print this page

Installation; Installation Procedure; Accessories - Sony PWS-110RX1 Installation Manual

Network rx station.
Hide thumbs


1-1. Installation Procedure

The following flowchart shows the installation procedure
of the unit.
For details of each work, refer to the relevant section.
The Operation Manual is also required for the items
marked with an asterisk (*).
Determination of
installation place
Installing an optional power unit
Removing the front panel
Installing the main unit to the rack
Installing the front panel
Operation check
Section 1


1-2. Accessories

. Operation Manual
. Installation Manual (this manual)
. Operation Guide
. Screws for Rack Mount
1-3. Operating Environment and Installation Space
1-4. Power Supply
1-5. Installing an Optional Power Unit
(This process is not necessary if you don't install an optional power unit.)
1-6-1. Part Required
1-6-2. Removing the Front Panel
1-6-3. Mounting to Rack (M5 Screw Holes)
Refer to the Installation Manual for RMM-10.
(This process is not necessary if you don't mount this unit into a rack.)
1-6-4. Mounting to Rack (Square Holes)
(This process is not necessary if you don't mount this unit into a rack.)
1-6-5. Installing the Front Panel
1-7. Connector Input/Output Signals
1-8. Connectors and Cables
Check the operation of the unit depending on the configuration of the system.
1-1 (E)


Table of Contents

   Also See for Sony PWS-110RX1

   Related Manuals for Sony PWS-110RX1

Comments to this Manuals

Symbols: 0
Latest comments: