Download  Print this page

Installing An Optional Power Unit - Sony PWS-110RX1 Installation Manual

Network rx station.
Hide thumbs

Advertisement

1-5. Installing an Optional Power Unit

This process is not necessary when no power unit is added.
Power unit
Optional power supply PWSK-101
1. Remove the four screws (B3 x 8), and then remove the
rear panel (power) assembly.
2. Remove the two screws (B3 x 8), and then remove the
blank panel (power) from the rear panel (power).
B3
8
B3
8
PWS-110RX1
Rear panel (power)
assembly
Blank panel
(power)
Rear panel
(power)
3. Insert the power unit.
n
Make sure that the power unit has been locked after the
insertion. (The power unit cannot be drawn out by
pulling the handle without pulling up the lever.)
Power unit
4. Align the hole to the boss, attach the rear panel (power),
and then tighten the four screws (B3 x 8).
n
First tighten the screw (a) shown in the illustration, and
then tighten the other three screws.
Boss
Hole
B3
8
(a)
B3
8
Rear panel
(power)
1-5 (E)

Advertisement

Table of Contents

   Also See for Sony PWS-110RX1

   Related Manuals for Sony PWS-110RX1

Comments to this Manuals

Symbols: 0
Latest comments: