Catcher; Mulcher Insert; Rear Discharging - Husqvarna LC 247 Operator's Manual

• Move the lever to the back for lower cutting height and
to the front for higher cutting height.
• The cutting height can be adjusted to 6 different
positions with the cutting height lever.

Catcher

• The collector's handle situated on the frame must be
placed over the collector bag.
• Fasten the lower part of the frame in the groove
underneath the collector.
• Secure the frame by using the quick-action clips.
76 – English
ASSEMBLING AND ADJUSTMENTS
• Make sure the machine's discharge deck is clean and
free from grass cuttings.
• Hook the collector onto the top edge of the chassis.
• Place the collector tongue in the machine's discharge
deck.
• Fit the bagger bottom in the discharge hole.
Mulcher insert - Accessories
A mulching-kit is available as an accessory, to make the
machines equipped with a catcher able to be used with
mulching function. The kit contains of a mulch plug and a
blade.
• Raise the discharge guard to mount / dismount the
mulch plug.
• Replace the blade with the supplied Combi blade. For
more information, see "Cutting equipment".

Rear discharging

The machine can also be used without the mulcher insert
and collector.
• Lift up the back shield and remove the catcher.
• Remove the mulch plug.
• Close the shield.