Troubleshooting - Philips PD7008 User Manual

Frequency response
Signal/noise ratio
Audio distortion + noise
Channel separation
Dynamic range
Audio out (analog audio)
Load impedance
Video out
Load impedance

8 Troubleshooting

Warning
•
Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the player, check the following points
before requesting service. If the problem remains unsolved, register your
player and get support at www.philips.com/welcome.
No power
• Ensure that both plugs of the mains cord are properly connected.
• Ensure that there is power at the AC outlet.
• Check if the built-in battery is drained.
No sound
• Ensure that the AV cable is connected correctly.
No response to the remote control
• Ensure that the path between the remote control and the player is
clear from obstacles.
• From a close distance, point the remote control directly at the player.
• Replace the remote control batteries.
24 EN
20Hz-20KHz ± 3dB
80 dB
-80 (1KHz)
80 dB
80 dB
Output level: 2V ± 10%
10 K
Output level: 1Vp - p ± 20%
75