Sony CYBER-SHOT dsc-s75 Operating Instructions Manual page 73

When "CHANGE MEMORY
STICK" IS displayed, eject the
"Memory Stick."
"INSERT MEMORY STICK"
appears.
Insert another "Memory
Stick."
"RECORDING' appears. When
copying is completed,
"COMPLETE" appears.
To end copymg, select [EXIT]
with A/V, then press 0.
To copy the image to
another "Memory Stick"
Select [CONTINUE] with UI, press
0, then repeat steps 7 and 8.
To cancel copying part-way
Select [CANCEZL] with 4/F m step 3
or [EXlTj with w/, m step 6, then
press 0.
Notes
l
If you do not select [EXIT] after
"COMPLETE" appears and Instead Insert
a new "Memory S&k," the same nnage IS
copled agam.
l
You cannot copy uncompressed Images.
l
You cannot copy Images that are bigger
than 5 MB at once. If "NOT ENOUGH
MEMORY" appears or 4 flashes on the
INDEX screen, cancel some Images to
copy and try agam.
72
Selecting still images
to print (PRINT)
Mode dial: 0
You can mark a prmt mark on still
Images recorded with your camera.
Thus mark 1s convernent when you
have images prmted at a shop that
conforms with the DPOF (Digital Prmt
Order Format) standard.
2,4
W
3
Set the mode dial to H .
In single-Image mode
Display the Image you want to
pnnt with */,
In trlplelmage mode
Press the zoom W button twice to
turn to the triple-image mode.
Display the image you want to
pnnt \nth Vb
Press MENU.
The menu appears.
Select [PRINT] with 4/b in
single-image mode, or with
A/V m triple-image mode,
then press 0.
The & (pnnt) mark IS marked on
the displayed image (or the
rmddle-positioned image m tnple-
image mode).
To unmark the print mark
Press l
agam m step 4. & mark
disappears.