Sony CYBER-SHOT dsc-s75 Operating Instructions Manual page 100

SONY@
DSGS75
p. 57
To delete some or all the frame images while
making a Clip Motion recording
Incorrect:
@ Select [OK], then press 0.
When [DELETE LAST] is selected m step 0, each time you
repeat step 0, the recorded frame is deleted from the newest one.
Correct:
@ Select [OK], then press 0.
When [DELETE LAST] is selected m step 0, each time you
repeat steps @ through 0, the recorded frame 1s deleted from the
newest one.
p. 69
To release protection
Incorrect: If you selected [ALL] m step 4, select [OFF] then press 0. If you
selected [SELECT] m step 4, select the images to be unprotected
with the control button. Select [OK] with 4/F, then press 0.
Correct: If you selected [ALL] m step 4, select [OFF] with d/F, then press
0. If you selected [SELECT] m step 4, select the images to be
unprotected with An/d/F, then press 0. Repeat this step to
select other images. When you have selected all the images to be
unprotected, press MENU and select [OK] with d/F, then press
0.
p. 74
4 Play the moving image.
Incorrect: If you press
l
at this time, 411,
II)
(frame forward, frame
reverse), [CANCEL] and [EXIT] appear on the screen. If you
select
[4II, II)],
you can finely adjust the divtde location usmg
4/b
Correct:
If you press
l
at the divrde pomt,
[Ml, Ilk]
(frame forward,
frame reverse), [OK], [CANCEL] and [EXIT] appear on the
screen. If you select
[+II, II)]
with A/I, you can finely
adjust
the divide locatton using d/b
Corrections
Sony Corporation 0 2001 Prmtecl In Japan
3-070-093-l l(1)