Table of Contents
Advertisement
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
Notes
•
In this manual, the suffix of each model number (e.g., KX-NS0154CE) is omitted unless necessary.
•
The screen shots shown in this guide are provided for reference only, and may differ from the screens displayed
on your PC.
•
The contents and design of the software are subject to change without notice.
KX-NS0154: Software File Version 01.000 or later
Quick Installation Guide
DECT 4-Channel IP Cell Station Unit
KX-NS0154
Model No.
Advertisement
Table of Contents
Related Manuals for Panasonic KX-NS0154
Summary of Contents for Panasonic KX-NS0154
- Page 1 The screen shots shown in this guide are provided for reference only, and may differ from the screens displayed on your PC. • The contents and design of the software are subject to change without notice. KX-NS0154: Software File Version 01.000 or later...
-
Page 2: Table Of Contents
Table of Contents Table of Contents 1 Regional Information ................3 2 Overview ....................6 3 Installing the IP-CSs ................8 Overview of IP-CSs ......................8 Connecting IP-CSs ......................10 Wall Mounting ........................12 Installing the Unified Maintenance Console ..............14 Initializing the IP-CS ......................15 4 Deployment Procedure ................16 Overview ..........................16 Site Planning ........................16 Site Survey ........................16... -
Page 3: Regional Information
1 Regional Information 1 Regional Information For users in the European Union only Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. -
Page 4: Additional Information
1 Regional Information Additional Information F.C.C. AND INDUSTRY CANADA RELEVANT INFORMATION CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. Privacy of communications may not be ensured when using this unit. Notice FCC ID can be found on the back of this unit. - Page 5 1 Regional Information interference is experienced, move the wireless telephone further away from the TV or VCR. This will often reduce, or eliminate, interference. Notes • The screen shots shown in this guide are provided for reference only, and may differ from the screens displayed on your PC.
-
Page 6: Overview
2 Overview Outline This document describes the installation, deployment, configuration of a DECT system that works with the Panasonic IP-PBX. In this system, DECT 6.0 Portable Stations are used together with IP Cell Stations. Related Documentation Important Information Describes the safety precautions to prevent personal injury and/or damage to property. - Page 7 2 Overview – Easy maintenance using wireless download. Activation Key Code and Key Management System To obtain additional activation keys, you need to purchase the appropriate activation key codes and access the Key Management System. You can download the activation keys as an activation key file from the Key Management System.
-
Page 8: Installing The Ip-Css
3 Installing the IP-CSs 3 Installing the IP-CSs 3.1 Overview of IP-CSs Names and Locations Antennas RJ45 Modular RESET Switch CS ID Number (ID: xxxxxxxxxx) DIP Switch DC Jack MAC Address Unpacking Unpack the box and check the items below: IP-CS Wall Mounting Plate Screws... - Page 9 3 Installing the IP-CSs Amber Stand-by (unstable synchronization [no active calls]) Slow Flashing Talk (unstable synchronization [active calls]) Moderate Flashing Busy (unstable synchronization) When the Activation Keys are applied, the Green color turns into Blue. All channels are occupied. IP-CS status indication during the site survey Color Status The IP-CS is connected to the AC adaptor.
-
Page 10: Connecting Ip-Css
3 Installing the IP-CSs 3.2 Connecting IP-CSs Connecting an IP-CS to a LAN Notice • Connect the units to the LAN only after completing network settings. • When connecting a unit to the LAN, connect it to a switching hub. Note •... - Page 11 3 Installing the IP-CSs Connecting an AC Adaptor to an IP-CS The units comply with the IEEE 802.3af Power-over-Ethernet (PoE) standard. If PoE is available on your network, these units can receive the necessary power supply from the network through the network cable. In this case, no AC adaptor is needed for the units.
-
Page 12: Wall Mounting
Make sure the cables are securely fastened to the wall. Notice Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Place the reference for wall mounting on the wall to mark the 2 screw positions. - Page 13 3 Installing the IP-CSs Reference for Wall Mounting Please copy this page and use as a reference for wall mounting. Install a screw here. 83 mm Install a screw here. Note Make sure to set the print size to correspond with the size of this page. If the dimension of the paper output still deviates slightly from the measurement indicated here, use the measurement indicated here.
-
Page 14: Installing The Unified Maintenance Console
3 Installing the IP-CSs 3.4 Installing the Unified Maintenance Console System Requirements Required Operating System • Microsoft Windows XP, Windows Vista Business, Windows 7, Windows 7 Professional, Windows 8 or ® ® ® Windows 8 Professional operating system Minimum Hardware Requirements •... -
Page 15: Initializing The Ip-Cs
3 Installing the IP-CSs 3.5 Initializing the IP-CS If the IP-CS does not operate properly, initialize the IP-CS. Before initializing the IP-CS, try the system feature again to confirm whether there definitely is a problem or not. The settings that are configured by using the IP Terminal Maintenance Console are changed back to their factory default by initializing the IP-CS. -
Page 16: Deployment Procedure
4 Deployment Procedure 4 Deployment Procedure 4.1 Overview 4.2 Site Planning 4.3 Site Survey 4.4 Example of How to Conduct the Site Survey 4.5 Example of How to Make a Site Map 4.6 Basic Network Configuration 4.7 CS Registration 4.8 Configuration and PS Registration (for a system using a KX-NS series) Quick Installation Guide... -
Page 17: Troubleshooting
5 Troubleshooting 5 Troubleshooting Quick Installation Guide... -
Page 18: Appendix
6 Appendix 6 Appendix 6.1 Specifications IP-CS Specification Type IP Cell Station Unit Supported Audio Narrowband Radio Method DECT 6.0 IP Port Number Flexible Setting Local Setting Yes (through Web application) Site Survey Mode Initialization Maximum Simultaneous Calls 4, 8 Power Supply (IEEE 802.3af Class2) Optional AC adaptor... - Page 19 6 Appendix Item Description Transmission Output Peak 250 mW CAUTION • The IP-CS should be kept free of dust, moisture, high temperature (more than 40 °C), low temperature (less than 0 °C), and vibration, and should not be exposed to direct sunlight. •...
- Page 20 Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd. © Panasonic System Networks Co., Ltd. 2014...