Configuration Example For Restoring Standalone Mode - HP FlexFabric 12900 Series Configuration Manual

[Sysname-Vlan-interface3] mad ip address 192.168.2.1 24 member 1
[Sysname-Vlan-interface3] mad ip address 192.168.2.2 24 member 2
[Sysname-Vlan-interface3] quit
# Disable the spanning tree feature on Ten-GigabitEthernet 1/4/0/1 and Ten-GigabitEthernet
2/4/0/1.
[Sysname] interface ten-gigabitethernet 1/4/0/1
[Sysname-Ten-GigabitEthernet1/4/0/1] undo stp enable
[Sysname-Ten-GigabitEthernet1/4/0/1] quit
[Sysname] interface ten-gigabitethernet 2/4/0/1
[Sysname-Ten-GigabitEthernet2/4/0/1] undo stp enable
[Sysname-Ten-GigabitEthernet2/4/0/1] quit

Configuration example for restoring standalone mode

Network requirements
Break the IRF fabric in
standalone.
Figure 14 Network diagram
Configuration procedure
1. Identify the master.
<IRF> display irf
MemberID
*+1
1
2
2
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
Figure 14, and change the operating mode of Device A and Device B from IRF to
Slot Role Priority
16 Master 1
17 Standby 1
16 Standby 1
17 Standby 1
CPU-Mac
00e0-fc0f-8c12
00e0-fc0f-8c12
00e0-fc0f-8c13
00e0-fc0f-8c13
38
Description
DeviceA
DeviceA
DeviceB
DeviceB