Download Print this page

Advertisement

Saving the converted configuration file to the main board succeeded.
Slot 1:
Saving the converted configuration file succeeded.
Now rebooting, please wait...
Device A reboots to form a single-chassis IRF fabric.
# Shut down Ten-GigabitEthernet 1/3/0/1 through Ten-GigabitEthernet 1/3/0/4.
<Sysname> system-view
[Sysname] interface range ten-gigabitethernet 1/3/0/1 to ten-gigabitethernet 1/3/0/4
[Sysname-if-range] shutdown
[Sysname-if-range] quit
# Bind Ten-GigabitEthernet 1/3/0/1 through Ten-GigabitEthernet 1/3/0/4 to IRF-port 1/2.
[Sysname] irf-port 1/2
[Sysname-irf-port1/2] port group interface ten-gigabitethernet 1/3/0/1
[Sysname-irf-port1/2] port group interface ten-gigabitethernet 1/3/0/2
[Sysname-irf-port1/2] port group interface ten-gigabitethernet 1/3/0/3
[Sysname-irf-port1/2] port group interface ten-gigabitethernet 1/3/0/4
[Sysname-irf-port1/2] quit
# Bring up the IRF physical interfaces.
[Sysname] interface range ten-gigabitethernet 1/3/0/1 to ten-gigabitethernet 1/3/0/4
[Sysname-if-range] undo shutdown
[Sysname-if-range] quit
# Save the running configuration to the startup configuration file.
[Sysname] quit
<Sysname> save
2.
Configure IRF on Device B:
# Assign member ID 2 to Device B.
<Sysname> system-view
[Sysname] irf member 2
Info:
Member ID change will take effect after the member reboots and operates in
IRF mode.
# Enable IRF mode.
[Sysname] chassis convert mode irf
The device will switch to IRF mode and reboot. You are recommended to save the current
running configuration and specify the configuration file for the next startup.
Continue? [Y/N]:y
Do you want to convert the content of the next startup configuration file
flash:/startup.cfg to make it available in IRF mode? [Y/N]:y
Please wait...
Saving the converted configuration file to the main board succeeded.
Slot 1:
Saving the converted configuration file succeeded.
Now rebooting, please wait...
Device B reboots to form a single-chassis IRF fabric.
# Shut down Ten-GigabitEthernet 2/3/0/1 through Ten-GigabitEthernet 2/3/0/4.
<Sysname> system-view
[Sysname] interface range ten-gigabitethernet 2/3/0/1 to ten-gigabitethernet 2/3/0/4
36

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: