Table of Contents
Advertisement
4.
If the selected AP requires the password
you will enter its setting screen.
5.
Use the Direction Button to select the text and press
the [OK] Button to confirm it.
Field
7.
When the setting is done, select
) to validate the password and connect to the
AP.
8.
Or press the [Playback] Button/ select the
(
) to exit.
9.
The screen shown [CONNECTION OK] indicates the
connection is established.
10.
When the connection is
will show on the top of the screen.
11.
The screen shown [CONNECTION FAILED] indicates
the camcorder does not connect to the AP.
Note
•
This camcorder only supports the AP(SSID) named in English/number/symbols (ASCII
characters).
•
The possible reasons for "CONNECTION FAILED" could be (1) wrong password ; (2) you
are not in the wireless network area of the AP. (3) the camcorder does not support the type
of encryption used on the AP. This model only supports WEP/WPA/WPA2 personal type of
encryption, but not up to enterprise level (4)your network requires PPPoE account/password
information.
•
You can only enter text in English, regardless of the OSD language.
authentication,
Description
Capital letters
Lower case letters
Numbers, symbols
the [Confirm] icon (
Return icon
established, the signal strength
37
EN
Advertisement
Table of Contents
