The following FCC/IC RSS applies to the Wireless LAN adapter included in this product.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code Statement
For product available in the USA market, only channel 1 1 1 can be operated.
Selection of other channels is not possible.
To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories
that do not contain metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements and should be avoided.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To Avoid the Hazards of Electrical Shock and Fire
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your fingers or objects into the Unit.
Location and Handling
Do not install the Unit in direct sunlight, near strong magnetic fields or in a place subject to dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the Unit in a horizontal and stable position. Do not place anything directly on top or bottom of the Unit.
Depending on your external devices, noise or disturbance of picture and/or sound may be generated if the Unit is
placed too close to them. In this case, please ensure enough space between external devices and the Unit.
Depending on the environment, the temperature of this Unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the Unit.
Dew Condensation Warning
Dew condensation may form inside the Unit in the following conditions. If so, do not use this Unit at least for a few
hours until its inside gets dry.
– The Unit is moved from a cold place to a warm place.
– Under conditions of high humidity.
– After heating a cold room.