LAN and WAN access such as Web, email, E-commerce, and VPN. 2. Product Features With Pretec’s Bluetooth CompactFlash Card with PCMCIA adapter and Bluetooth software, you can establish wireless connections between your computer and other Bluetooth wireless devices. The features include: •...
Page 3
4. After you finished the installation, in the “Device Manager”, you will see the following window. In this window, you can see the “Pretec Bluetooth COM Bridge” has a question mark. This is OK because it is a special device and was designed to appear as such.
Page 4
1. Go to the “Control Panel”, Click the “Phone and Modem Options” to add a new mode Bluetooth Dial-Up Networking 2. Click “Add”, you will see the “Add/Remove Hardware Wizard”, Check the checkbox “Don’t detect my modem I will select it from a list.”, then click “Next”. Pretec Page 3 of 27 6/28/2002...
Page 5
User’s Manual for Windows 2000 3. After you click “Next”, the System will pop a window like below. You chose the “Standard 56000bps V90 Modem” as the Bluetooth modem. Click “Next” to continue. Pretec Page 4 of 27 6/28/2002...
Page 6
Before selecting, you should go to Device Manager to find out which COM port associating with “Bluetooth COM Port - DUN”. Refer to the above window to select the correct COM Port for your Bluetooth DUN modem. Pretec Page 5 of 27 6/28/2002...
Page 7
1. For the LAN Access, the installation procedure for modem is almost the same as Dial-up networking. The only difference is under installing new modem, you should choose the “Communications Cable between two computers ". Pretec Page 6 of 27 6/28/2002...
Page 8
3. After you click “Next”, the system will pop up the window to ask you which COM Port you will use. Before selecting, you should go to Device Manager to find out which COM port associating with “Bluetooth COM Port - LAN”. Pretec Page 7 of 27 6/28/2002...
Page 9
Refer to the above window to select the correct COM Port for your Bluetooth LAN modem. 4. After you install the “Communication cable between two computers”, you are ready to create a new network connection through LAN Access Point. Pretec Page 8 of 27 6/28/2002...
Page 10
Discovery" pops up. When it finds all the Bluetooth devices within the range, the "Device Discovery" windows will disappear. The discovery process includes device discovery and name discovery. This menu will give you some action option about bluetooth, like “service discovery”,”device discovery”, “BlueChat”……… Pretec Page 9 of 27 6/28/2002...
Page 11
3. After finding the devices, you can click one of the devices and show what services that device can provide. In the Device List Window (at the right-hand side of Windows Explorer), the first device is always the local device. Pretec Page 10 of 27 6/28/2002...
2. You can go to the Bluetooth Neighborhood to set the security level. Choose the Local Device, click the right button of your mouse, and then choose the Property. You will see the window like below. Pretec Page 11 of 27 6/28/2002...
You can go to the Bluetooth Neighborhood to set the Access mode. Choose the Local Device, click the right button of your mouse, and then choose the Property. You will see the window like below. Pretec Page 12 of 27 6/28/2002...
Page 14
2. Then you click the device that you want to exchange vCard with. You will see the following window appears. Click the “Exchange vCards”, then you will send your business card to this device, also you will get his business card to your device. Pretec Page 13 of 27 6/28/2002...
Bluetooth Device that you want to receive on the left hand side in Windows Explore. You also can use the Copy and Paste to do the object transfer between two Bluetooth devices. When you perform object push, the dialog box will show you the status. Pretec Page 14 of 27 6/28/2002...
“File Transfer Client ” or “File Transfer Server” to have File transfer working on both ends, the application on the remote computer also needs to run File transfer at the same time. Click it to run File Transfer Client or Server Pretec Page 15 of 27 6/28/2002...
Page 17
File Transfer Client to use. 3. After you share the directory and files, you can select them and click the “Properties” button to configure those directory or files. Pretec Page 16 of 27 6/28/2002...
Page 18
“File Transfer Client “ to use. 4. When you click the “File Transfer Client” menu to run it, the system will pop up a “Select Device to Connect” window for you to choose which device you want to connect. Pretec Page 17 of 27 6/28/2002...
Page 19
You can get file or directory from the File Transfer server or put file or directory to the File Transfer Server. Also you can create new folder in the Shared Directory from File Transfer Server. Pretec Page 18 of 27 6/28/2002...
Page 20
1. For Blue Chat, click “Blue Chat” on Bluetooth Menu on Windows Explorer Menu bar. To have Blue Chat working on both ends, the application on remote computer also needs to run at the same time. Click it to run Blue Chat Pretec Page 19 of 27 6/28/2002...
Page 21
“OK” and the following window will appear. 4. If you want to connect to a remote device, check the upper checkbox. Click “OK”, the following window will appear. Pretec Page 20 of 27 6/28/2002...
Page 22
6. Chose a Bluetooth Device you want to connect, and then click “OK”. The two Bluetooth devices now can connect to each other. You can type any text messages within Local Computer window and you can see the messages from Remote Computer too. Pretec Page 21 of 27 6/28/2002...
Installation section. 2. After you created a new connection, you should run Pretec Bluetooth Neighborhood application first. It will find the Bluetooth devices within the range. If you find devices such as Bluetooth phone/modem or Dial-Up Networking Access point, you can start the connection you just created, the system will show the following window.
Page 24
User’s Manual for Windows 2000 Pretec Page 23 of 27 6/28/2002...
1. Go to Control Panel -> Network and Dial-up Connections, click “Make new Connection”, a “New Connection Wizard” window will appear. Click Next, You will see the following window. 2. Select the “Connect directly to another computer” option and click Next to continue the installation. Pretec Page 24 of 27 6/28/2002...
Page 26
User’s Manual for Windows 2000 3. Select “Guest” option and click Next to continue. Pretec Page 25 of 27 6/28/2002...
Page 27
If you haven’t installed that modem, please refer to the Installation section. Then follow the screen instruction to complete the installation. 5. After you create a new connection, you should run Pretec Bluetooth Neighborhood application first. It will find the Bluetooth devices within the range. If you find a device such as the Bluetooth LAN Access point, you can start the connection you just created and the system will show a window to let you select the devices you want to connect.
Page 28
User’s Manual for Windows 2000 6. Uninstall Pretec Bluetooth Neighborhood Please click the “Start”, go to the “Programs”, find the ”Pretec Bluetooth Neighborhood”, and select the “Uninstall Bluetooth Neighborhood”. Follow the screen instructions, finish the uninstallation. Pretec Page 27 of 27...
Need help?
Do you have a question about the BT2000-CF and is the answer not in the manual?
Questions and answers