Operation; Important Safeguards - Sage BBL910UK Instruction Book

Boss series
Table of Contents

Advertisement

Available languages
  • EN

Available languages

ENGLISH
At Sage™ by Heston Blumenthal
we are very safety conscious. We design
®
and manufacture consumer products with the safety of you, our valued
customer, foremost in mind. In addition we ask that you exercise a degree
of care when using any electrical appliance and adhere to the following
precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE
REFERENCE
• Remove any packaging material and promotional labels before using the
blender for the first time.
• To avoid choking hazard for young children, remove and safely dispose
the protective cover fitted on the power plug.
• Do not attempt to operate the blender by any method other than that it is
intended and described in this booklet.
• Before using for the first time please ensure that your electricity supply is
the same as shown on the rating label on the underside of the appliance.
If you have any concerns please contact your local electricity company.
• Do not place blender near the edge of a bench or table during operation.
Ensure the surface is level, clean and free of water, flour, etc.
Vibration during operation may cause the appliance to move.
• Any significant spillage onto the surface under or around the appliance,
or onto the appliance itself, should be cleaned and dried before
continuing to use the appliance.
• Do not place this appliance on or near a hot gas or electric burner,
or where it could touch a heated oven.
• Always make sure the blender is properly assembled before use.
The appliance will not operate unless properly assembled.
Refer to assembly.
• Only use blender jug supplied with the blender.
• Always ensure bender lid is firmly in position on blender jug before
operating.
• Always ensure the blender is turned OFF by pressing the POWER button
on the control panel. Then switch the appliance OFF at the power outlet
and unplug the cord. Make sure the motor and blades have completely
stopped before attempting to move the appliance and/or attempting to
move the appliance, when the blender is unattended, not in use and
before assembly, disassembling, cleaning and storing.
• Do not operate the blender continuously with heavy loads for more than
10 seconds. Allow the motor to rest for 1 minute between each use.
• If food becomes lodged around the blending blade, turn the blender
off by pressing the POWER button on the control panel. Then switch
the appliance off at the power outlet and unplug the cord. Make sure
the motor and blades have completely stopped before removing the
jug from the motor base. Use a spatula to dislodge or stir the food
before continuing.
• Keep hands, fingers, hair, clothing as well as spatulas and other utensils
away from the appliance during operation.
• Be careful when handling the jug as the blades are very sharp.
Mishandling may cause injury.
• Do not remove the blender jug from the motor base while in operation.
• Do not operate the blender without food or liquid in the jug.
• Do not process hot or boiling liquids as they can be ejected out of jug due
to sudden steaming.
• Do not subject blender to extreme hot or cold for example placing a cold
jug in hot water or vice versa.
• Do not use blender while OVERLOAD PROTECTION is flashing on
LCD. It will stop flashing when blender has cooled down. The blender will
return to STANDBY mode and can be used as normal.
• Keep the appliance clean. Refer to Care, Cleaning and Guarantee.
4
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
• Unwind power cord fully before use.
• Do not let the power cord hang over the edge of a table, counter,
touch hot surfaces or become knotted.
• To protect against electric shock do not immerse the power cord,
power plug or appliance in water or any other liquid.
• This appliance is for household use only. Do not use this appliance for
anything other than its intended use. Misuse may cause injury.
• In order to avoid a hazard due to inadvertent resetting of the thermal cut
out this appliance must not be supplied through an external switching
device such as a timer or connected to a circuit that it regularly switched
on and off by the utility.
• Children shall not play with the appliance.
• This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities, lack of experience and knowledge,
or children unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Keep the appliance and its cord out of the reach of children.
• Do not use the appliance if power cord, power plug or appliance
becomes damaged in any way.
The symbol shown indicates that this appliance should not
be disposed of in normal household waste. It should be taken
to a local authority waste collection centre designated for
this purpose or to a dealer providing this service. For more
information, please contact your local council office.

OPERATION

GETTING STARTED
ON/OFF
The ON/OFF button powers the unit into READY mode.
READY MODE
The blender will default to MANUAL.
MANUAL FEATURES
SPEED CONTROL DIAL
• There are 12 speed settings from STIR through to MILL.
• STIR mixes more delicate foods with a slow stirring motion and light
pausing to fold ingredients together.
• MILL is the fastest setting, and is ideal for milling nuts, grains and seeds.
• The blender is programmed to allow manual speeds to run for 6 minutes
before automatically stopping.
PAUSE I PLAY
Pauses and holds the speed and timer for up to 2 minutes.
Press PAUSE I PLAY again to resume.
REPEAT FUNCTION
• If the START button is pressed when using the manual speed dial, or if
the timer finishes, the current speed setting will be held for 2 minutes to
allow a quick repeat of the cycle.
• Pressing the START button will re-start this repeat cycle.
• If you want to clear the previous speed from the memory, press and hold
the START button for 2 seconds.

Advertisement

Table of Contents
loading

Table of Contents