Electrolux EKG9686X User Manual page 11

No gas supply
Maximum gas supply
Minimum gas supply
Ignition of the hob gas burners
To light up the burner, keep pushing the ignition button as indicated by
Then push in the knob and turn it anti-clockwise to maximum, and hold it for 3 to 5
seconds.
The ignition will spark and ignite the burner. At this position the gas supply is at the
maximum and the flame also at its maximum.
You can reduce the flame size by turning the knob in anti-clockwise direction to achieve
your requirements.
Should the burner fail to light up, turn the knob to its original position and try again.
Your burner flame should be blue in colour.
NOTE -When first used, the gas burner will not ignite immediately.
Time is required for the LPG to fully fill the operating system.
For 90cm ovens with bottle compartment, this same symptom will also be present
when the gas cylinder has emptied and a new cylinder installed.
Air adjustment of the burner body
The mixing ratio of LPG and air is important to provide complete combustion of gas and
to obtain a blue flame. The adjustment and nozzle used for each individual burner body on
your cooker has been designed so as to achieve this requirement.
11