Programmable Alarms - AcuRite 01021 Instruction Manual

Programmable Weather Alarms
Each selectable weather category features an alarm option. When an alarm sounds,
the display emits audible beeping and flashes the affected category, its alarm
settings, and any other relevant data.
Alarms can be customized to alert you when your programmed value is reached.
Alarms include:
OUTDOOR TEMPERATURE
OUTDOOR HUMIDITY
LIGHTNING STRIKES (ON/OFF only; ON by default)
RAINFALL
Setup an Alarm
1. Press and release the "
which you wish to set an alarm is shown on the display.
2. Press and release the "ALARMS" button until
4. Press and release the "
flash on the display.
5. Press and release the "
6. Press and release the "
the display.
7. Press and release the "
8. Press and release the "
9. Repeat steps 1-8, as needed.
Disable an Alarm
1. Press and release the "
wish to disable an alarm is shown on the display.
2. Press and release the "ALARMS" button until
3. Press and release the "
NOTE: To disable ALL alarms at once, press and HOLD the "ALARMS" button for
5 seconds.
" or the " " button until the reading for
SELECT SELECT
SET
" button. If applicable, the current LOW alarm value will
ENTER
" or " " buttons to adjust the alarm's LOW value.
SELECT
SELECT
SET
" button. The current HIGH alarm value will flash on
ENTER
" or " " buttons to adjust the alarm's HIGH value.
SELECT
SELECT
SET
" button to save your adjustments.
ENTER
" or the " " button until the reading for which you
SELECT
SELECT
SET
" button until the display returns to normal viewing mode.
ENTER
16
is shown on the display.
is shown on the display.