Connect A Computer (Option A2+) - Philips SYE5600 User Manual

Philips powerline ethernet adapter user manual sye5600/00 syk3600/00 syk5600/00 sye5600/05 syk3600/05 syk5600/05
Hide thumbs Also See for SYE5600:
Table of Contents

Advertisement

EN
10
Dependent upon the type of broadband Internet subscription, one or more
computers or network devices can share the broadband Internet subscription.
Contact your Internet service provider for more information.
When two or more network devices share the broadband Internet subscription, a
router is required. When your Internet service provider did not provide a modem
with an integrated router, you must install a separate router.
Refer to www.philips.com/ce for the latest Philips routers (base stations).

Connect a computer (option A2+)

It is not necessary to install a driver in the connected PC for the powerline ethernet
adapter. However, the Ethernet adapter in the connected PC needs a driver to
operate correctly.
1 When you want to enable personal security on the powerline ethernet network,
write down the Product ID code (for example, WQH7-E2JU-3QLH-YBRY).
Refer to 'Secure' on page 11.
AC
AC
5
2 Take the network cable.
3 Plug the connector of the network cable into the network port of the computer.
4 Plug the other connector of the network cable into the network port of the
powerline ethernet adapter.
5 Plug the powerline ethernet adapter into the power supply.
> The PL-LINK light comes on.
2
PC
4
3

Advertisement

Table of Contents
loading

Table of Contents