Canon PIXMA E470 series Online Manual page 298

Hide thumbs Also See for PIXMA E470 series:
Table of Contents

Advertisement

1. Roll up paper in opposite direction to paper curl as shown below.
2. Check that paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.
Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing.
This may improve the print result.
(C) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
If intensity is set high, reduce intensity setting and try printing again.
Check4
If you are printing with a high intensity setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
Check the intensity setting in the printer driver.
• For Windows:
Adjusting Intensity
• For Mac OS:
Adjusting Intensity
Do not print outside recommended printing area.
Check5
If you print outside the recommended printing area of your paper, ink may stain the lower edge of the paper.
Resize the document using application software.
Print Area
Is platen glass dirty?
Check6
298

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents