Nokia Smart Home User Manual page 11

Basic setup
4 . The following window [Figure 3] opens .
5 . Set the parameters as shown in Table 1 .
Table 1. Wi-Fi 2.4 GHz parameters
Parameter Description
Enable Toggle to enable or disable
the 2 .4 GHz network
Mode Choose:
• auto(b/g/n)
• b
• g
• n
• b/g
Bandwidth Choose the mode of operation:
• 20 MHz
• 40 MHz
Channel Indicates the wireless channel
being used
Power Choose between Wi-Fi transmit
power percentages:
• 100%*
• 75%
• 50%
• 25%
Transmit power for ETSI is 100 mW .
SSID list The active 2 .4 GHz SSIDs . In this
example, there are two: Home
network and guest network . When you
select one of the SSIDs listed, it allows
you to modify the SSID details such
as: Enable/Disable the SSID and SSID
broadcast, name or rename the SSID,
and set the encryption mode (OPEN,
WEP, WPA/WPA2 Personal, WPA/WPA2
Enterprise) . In this example [Figure 4],
the guest network SSID is opened .
* 100% Wi-Fi transmit power for all regions outside of Europe is 500 mW;
for 100% - Wi-Fi .
11 Nokia Smart Home user guide
Figure 3
Figure 4