Driving Safety - HP F885 Quick Start Manual

3.3 Driving Safety

The following driving safety function is for reference only.
Drivers are advised to exercise discretion based on actual road
conditions.
Menu option
Parking Mode
Collision
Detection
Driver Fatigue
Alert
Headlight
Warning
FCMD
Note:
1. The Driving Safety function is limited to triggering no more than two alarms at the
same time. If a voice and alert message have been triggered, any other alarm will
be ignored until either of the two is settled.
2. The detections of FCMD may be inaccurate when used in rain, at night or in
environments of insufficient lighting. Drivers are advised to exercise discretion
based on actual road conditions.
To monitor the vehicle when it is parked, you can activate
Vibration Detection, or Motion and Collision Detection.
If Collision Detection is activated, this camcorder starts
emergency recording once it detects any collision.
When Driver Fatigue Alert is enabled, audible alert and
screen message will be activated 1 hour after the
camcorder is powered on, with a repetition every 30
minutes.
When Headlight Warning is activated, camcorder will issue
an audible alert and screen message reminding that
insufficient brightness is sensed on the recording face.
If FCMD function is enabled, the camcorder will determine
it from front car about 3 ~ 4 meters. When the front object
moves about 3 ~ 5 seconds and the car did not start to
drive forward, the camcorder will issue audible alert and
screen message.
9
Description