Table of Contents
Advertisement
12-1-12 Separation of ASSY PCB P-SMPS & SMPS DC-DC
Part Name
SMPS
① Detach all connectors from the Assy PCB P-SMPS.
&
SMPS
② Remove 8 screws.
DC-DC
: PH,+,WWP,M3,L8,NI PLT
Board
③ Remove the Assy SMPS PCB.
④ Detach all connectors from the Assy SMPS DC/DC
Board.
⑤ Remove 4 screws.
: PH,+,WWP,M3,L8,NI PLT
⑥ Remove the SMPS DC/DC Board.
: Wear gloves when handling the power board as there
may be some remaining electrical charge in the capacitor.
Specifically, avoid touching any part of the capacitor.
12-1-13 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARD
Part Name
Logic
① Detach all connectors from the Logic Main Board.
Board
② Remove 4 screws.
: WSP,PH,+,M3,L8,NI PLT
③ Remove the Logic Main Board.
Samsung Electronics
Description
Description
Disassembly & Reassembly
Description Photo
Description Photo
12-5
Advertisement
Table of Contents
Troubleshooting
