Sockets or
connectors on
rear panel
VIDEO IN (Black
9
strip)
10
REVERSE
CAMERA (Orange
strip)
PARKING
11
BRAKE (Pink
strip)
Tip
•
The pin arrangement for the ISO connectors depends
on the type of your vehicle. To avoid damage to the
unit, connect properly.
Mount into the dashboard
•
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
•
If the car battery is not disconnected, to
avoid short-circuit, make sure that the bare
wires do not touch each other.
1
Make sure that the car dashboard opening
is within these measurements.
10
EN
External sockets or
connectors
Video output socket
of an external video
player
Reverse camera (B+)
Parking brake (-)
2
Remove the mounting sleeve with the
supplied disassembly tools.
3
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
•
If the unit is not fixed by sleeve but by the supplied
screw, skip this step.
1 8
3 m
m
4
Slide the unit into the dashboard until you
hear a "click".