Making 21.1 UHF Remote
Work with Receiver
For 21.1 UHF
Use the following
instructions if you
have configured
your remote to use
UHF signals.
Note: Use these instructions if your receiver
does not support System Wizard.
1
2
3
4
5
Verify the UHF antenna
is installed on the back
of the receiver.
Turn your receiver and
TV on, and press
SYSTEM INFO on the
front of the receiver.
Confirm that you
see the System
Info screen.
Press RECORD on
1
your remote. The remote
address will probably
1
change on the screen.
Confirm that your remote
operates your receiver
by pressing remote
buttons. If this is not
working, go back to
step 4.
5