Specifications; Safety-Related Component Warning; Amplifier Section - Sony TA-F3A Service Manual

G E N E R A L
Power Requirements:
Power Consumption:
Dimensions:

SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY SHADING AND
MARK ON THE SCHEMATIC DIAGRAMS, EXPLODED
VIEWS AND IN THE PARTS LIST ARE CRITICAL TO
SAFE OPERATION. REPLACE THESE COMPONENTS
WITH SONY PARTS WHOSE PART NUMBERS APPEAR
A8 SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AVANT RAPPORT
120V ac, 60 Hz (US, Canadian Model)
220 V ac, 50160 Hz (AEP Model)
240 V ac, 50/60 Hz (UK Model)
120 or 220V ac adjustable. 50/60 Hz (E Model)
85 W (US Model)
140W [Canadian Model)
210W (AEP, Model)
E
240W (UK Model)
Approx. 435 (w) x 145 (h) x 370 (d) mm
17 1/8(w) x x
(US, Canadian Model)
Approx. 410 (w) x 145 (h) x 370 (d) mm
x x
(AEP, UK, E Model)
Including projecting parts and controls

SPECIFICATIONS

Weight:

AMPLIFIER SECTION

Continuous RMS
Power output:
(Less than 0.5% THD)
inches
inches
Power Bandwidth (IHF):
Damping Factor:
Harmonic Distortion:
IM Distortion:
(60 Hz: 7 kHz = 4:1)
Approx. 10.5 kg (23 lb 2oz). net
Approx. 12.5 kg (27 lb 9 oz), in shipping carton
(US, Canadian Model)
Approx. 9.5 kg (21 lb), net
11.5 kg (25Ib 6oz), in shipping carton
(AEP, , E Model)
UK
Both channels driven simultaneously
At 1 kHz
5OW+5OW
At 20 Hz-20 kHz
According to DIN 45500 (AEP, UK, E Model)
52W+52W
10 Hz-25 kHz
30
Less than 0.5% at rated output
Less than 0.1 % at 1 W output
Less than 0.5 % at rated output
Less than 0.1% at 1W output