Cleaning the air filter element
The air filter element should be cleaned
at the intervals specified in the periodic
maintenance and lubrication chart.
Clean or, if necessary, replace the air
filter element more frequently if you are
riding in unusually wet or dusty areas.
1. Remove the air filter case cover by
removing the bolts.
1. Air filter case cover
2. Bolt
2. Pull the air filter element out.
3. Lightly tap the air filter element to
remove most of the dust and dirt,
and then blow the remaining dirt
out with compressed air as
shown. If the air filter element is
damaged, replace it.
Periodic maintenance and adjustment
EAU33384
1. Air filter element
4. Insert the air filter element into the
air filter case as shown. NOTICE:
Make sure that the air filter ele-
ment is properly seated in the
air filter case. The engine should
never be operated without the
air filter element installed, oth-
erwise the piston(s) and/or cyl-
inder(s)
excessively worn.
7-15
1. Air filter element holder
2. Projection
3. Slot
5. Install the air filter case cover by
may
become
[ECA10482]
1. Match marks
2
aligning the match marks and in-
stalling the bolts.
1
3
7