Philips MCP9350i Service Manual page 45

12.7.3. TV Daughterboard Subassembly Removal
1. Remove the top cover. See paragraph 12.1.1.
2. Remove the riser card subassembly. See paragraph 12.5.1.
3. Remove the thermistor (4) from the motherboard. See Figure 12.7-4.
4. Remove the 2 mounting screws (5) from the TV daughterboard subassembly. See Figure 12.7-5.
5. Remove the TV daughterboard subassembly from the chassis.
12.7.4. TV Daughterboard Subassembly Re-Assembly
To re-assemble the TV daughterboard subassembly, do all processes described in paragraph 12.7.3 in reverse order.
Note: The torque setting required for the TV daughterboard subassembly mounting screws (5) is 8kg-cm
12.7.5. TV Daughterboard Removal
1. Remove the top cover. See paragraph 12.1.1.
2. Remove the riser card subassembly. See paragraph 12.5.1.
3. Remove the TV daughterboard subassembly. See paragraph 12.7.3.
4. Disconnect the TV daughterboard cable (6). See Figure 12.7-6.
5. Remove the 2 mounting screws (7) from the TV daughterboard. See Figure 12.7-6.
6. Remove the TV daughterboard from the TV daughterboard cage.
7
12.7.6. TV Daughterboard Re-Assembly
To re-assemble the TV daughterboard, do all processes described in paragraph 12.7.5 in reverse order.
Note: The torque setting required for the TV daughterboard mounting screws (7) is 6kg-cm
4
Figure 12.7-4
7
6
Figure 12.7-6
Hardware Repair
5
5
MCP9350i 12.
Figure 12.7-5
EN 45