Sanyo XT-43S8100FS Owner's Manual page 18

Manual, you should set date and time at Date
and Time item. Highlight Date or Time, press
OK to enter and then use 0-9 buttons and OK
buttons to change the date or time.
Note:
Time option will not be memorized when
turning on the TV next time, and the TV 's
time will start from the default.
• Power on timer: Use
Daily or Off. If you select Once or Daily, you
should set a time period after which the TV
automatically switches to on at Time below
this item. Highlight Time, press OK to enter
and then use 0-9 buttons and OK buttons to
change the time.
• Power off timer: Use
Daily or Off. If you select Once or Daily, you
should set a time period after which the TV
automatically switches to off at Time below
this item. Highlight Time, press OKto enter
and then use 0-9 buttons and OK buttons to
change the time.
• Sleep timer: Sets a period of time after which
the TV set goes into standby mode. Use
to set the period (120 minutes maximum). To
disable this function, select Off.
• Auto standby: Sets a period of time after which
the TV set goes into standby mode. Use
to set the period. To disable this function, select
Off.
Lock: This menu can control the special function for
TV channels.
Note: You must enter your personal code before
entering the Lock menu.
Select System > Lock and press OK
Then press remote number keys to enter password
to enter lock menu.
The factory
And the super password is 0423.
If you forget your code, enter it to override any existing
codes.
The Lock options are as below:
• Channel lock: This option allows you to lock a
certain Channel. Use
channel you want to lock, then press OK to lock.
To unlock, use the same operation.
• Input lock: This option allows you to lock a
certain external source you want to lock. Press
OK to display Input lock menu, then press
to select a certain external source you want to
lock, and press OK to lock. To unlock, use the
same operation.
Note: when the current input is locked, you can
press OK and enter the password to enter.
• Front panel lock: Press
lock the set's buttons.
/ to select Once,
to select Once,
default code is 1234.
to select a certain TV
to select On to
• Installation lock: Press
to prevent access to the Installation menu to
prevent any channels from being set up without
your consent.
• Change password: This option allows you to
change the password. Press OK to enter, then
press OK to display the virtual keyboard, and
enter the new password twice.
• Max volume: Press OK to display the adjustment
bar and use
watching program.
• Clean all: Press OK to enter, use
OK, clear all settings.
Input Settings: Select System > Input Settings,
press OK to enter. User can select the device name of
the input source here, easy to identify the source.
Location: Use
OK to enter.
Auto source: Press OK to enter, press
On or Off the auto source, and press OK
Sports mode: Enhance the picture quality of moving
picture.
LED Indicator
Allows you to select the LED indicator on the TV front
1. Press MENU on the remote control, select System >
LED Indicator and press OK to enter.
2. Press to select Flashing or Normal or Off
and press OK
Instant power on: Press OK to enter, press
to turn On or Off the instant power, and press OK to
Reset
Allows you to reset the TV to factory default settings.
1. Press MENU on the remote control, select
System > Reset and press OK to enter.
2. Use the numeric buttons to enter the password.
3. Press / to select OK and press OK
4. The Initial setup menu appears. Follow the
instructions in the section Initial setup.
18
Using your TV
to select On
to set the max volume when
to select Home, Shop press
/
to set
to turn