Compliance With Ul Standard - Toshiba VF-P7 Instruction Manual

Compliance with ce marking and ul standard 200v class 400v class

Hide thumbs Also See for VF-P7:

２．Compliance with UL Standard

The VF-P7 models conform to the UL Standard have the UL/CUL mark on the nameplate.

2.1. Compliance with Installation

The VF-P7 Inverter must be installed in a panel, and used within the maximum surrounding air

temperature 50 degrees.

2.2. Compliance with Connection

Use the UL listed cables, 75 degree copper wire only, with the UL listed closed -loop

terminal connector at field wiring connection to the inverter input terminals, R/L1, S/L2,

T/L3, output terminals, U/T1, V/T2, W/T3, and other main terminals.

Refer the wire gauge, the type of closed-loop terminals and crimping tools to Table.4

and Table.5.

2.3. Compliance with Peripheral devices

Use the UL listed MCCB or fuses at connecting to power supply.

(The fuses should be used CLASS CC/J.)

Refer to the instruction manual about selecting the rating of them.

Short circuit test is performed under the condition of the power supply

short-circuit currents in Table. 3.

These currents depend on the applicable motor capacities.

Table.3

Input voltage

Applicable motor

(v)

18.5　～　　37

200

　45　～　110

18.5　～　　37

　45　～　132

400

160　～　280

Power supply short-circuit current and maximum input voltage

power supply shout-circuit current and maximum input voltage

( kW )