Hardware Overview; Front/Bottom - D-Link DCH-Z310 User Manual

Section 1 - Product Overview
Pairing /
Unpairing / Test
1
/ Reset Button &
LED
2 Speaker
D-Link DCH-Z310 User Manual

Hardware Overview

Front/Bottom

Press the button three times quickly to set the device to Add or Remove mode.
Press the button three times and hold the fourth time until you hear a beep to reset the DCH-Z310 to the
factory default settings.
Blinking Red
Light Off
Alarm sounds when the sensor is triggered.
1
The alarm has been triggered.
The alarm has not been triggered.
2
4