General Regulations; Application; Norms And Regulations - andrews SUPAflo EVO SF60 EVO Installation And Service Manual

General Regulations

General Regulations

Application

Norms and regulations

This documentation contains
important information, which is a
base for safe and reliable installa-
tion, commissioning and operation
of the boiler. All activities described
in this document may only be exce-
cuted by authorized companies.
Changes to this document may be
effected without prior notice. We
accept no obligation to adapt previ-
ously delivered products to incorpo-
rate such changes.
Only original spare parts may be
used when replacing components
on the boiler, otherwise warranty
will be void.
Application
The boiler may be used for heating
and hot water production purposes
only. The boiler should be connected
to closed systems with a maximum
temperature of 100 °C (high limit
temperature), maximum setpoint
temperature is 90 °C.
Norms and regulations
When installing and operating the
boiler, all applicable norms (euro-
pean and local) should be fulfilled:
• Local building regulations for in-
stalling combustion air and flue
gas systems;
• Regulation for connecting the boil-
er to the electrical appliance;
• Regulations for connecting the
boiler to the local gas network;
• Norms and regulations according
to safety equipment for heating
systems;
• Any additional local laws/regula-
tions with regard to installing and
operating heating systems.
4
This boiler is CE approved and applies
to the following European standards:
• 1992 / 42 / EEC Boiler efficiency
directive.
• 2009 / 142 / EEC Gas appliance di-
rective.
• 2009/125/EC Directive of the
European Parliament and of the
Council of 21 October 2009 estab-
lishing a framework for the setting
of ecodesign requirements for en-
ergy-related products
• 811-813-814/2013 EU regulation
• 2014 / 30 / EU The Electromag-
netic Compatibility (EMC) Direc-
tive
• 2014 / 35 / EU Low Voltage Direc-
tive
• EN 13203-2: 2015 (Gas-fired do-
mestic appliances producing hot
water - Part 2: Assessment of en-
ergy consumption)
• EN 15036-1: 2006 Heating boilers -
Test regulations for airborne noise
emissions from heat generators
- Part 1: Airborne noise emissions
from heat generators
• EN-ISO 3743-1: 2010 Acoustics
- Determination of sound power
levels and sound energy levels of
noise sources using sound pres-
sure - Engineering methods for
small movable sources in rever-
berant fields - Part 1: Comparison
method for a hard-walled test
room.
• EN 15502-1: 2012 +A1:2015 (Gas-
fired heating boilers - Part 1: Gen-
eral requirements and tests)
• EN 15502-2-1: 2012 (Gas-fired
central heating boilers - Part 2-1:
Specific standard for type C appli-
ances and type B2, B3 and B5 ap-
pliances of a nominal heat input
not exceeding 1000 kW)
• EN 60335-1 Household and similar
electrical appliances - Safety- Part
1: General requirements
• EN 60335-2-102: 2016 Household
and similar appliances - Safety
- Part 2-102: Particular require-
ments for gas, oil and solid-fuel
burning appliances having electri-
cal connections.
• EN 55014-1: 2006 Electromag-
netic compatibility- Requirements
for household appliances, electric
tools and similar apparatus Part 1:
Emission A1:2009, A2:2011
• EN 55014-2: 2015 Electromag-
netic compatibility- Requirements
for household appliances, electric
tools and similar apparatus Part 2:
Immunity - Product family stand-
ard.
• EN 61000-3-2: 2014 Electromag-
netic compatibility (EMC) Part 3-2:
Limits — Limits for harmonic cur-
rent emissions equipment input
current <= 16 A per phase.
• EN 61000-3-3: 2013 Electromag-
netic compatibility (EMC) Part
3-3: Limits — Limitation of voltage
changes, voltage fluctuations and
flicker in public low-voltage supply
systems, for equipment with rated
current <= 16 A per phase and not
subject to conditional connection.
Additional national standards
Germany:
• RAL - UZ 61 / DIN 4702-8
Switzerland:
• SVGW
Austria:
• 15a V-BG