Hitachi LULLABABY BCM241T08 Owner's Manual page 9

1 Setup
1.1 Camera Setup - Using AC Power (See Fig. 3)
1. Plug the provided power adapter into a wall outlet.
2. Plug the other end of the power adapter into the side of the camera.
3. Press the POWER
camera will light up (RED).
Note : Press and hold the POWER
.
1.2 Location / Placement
Place the camera in a convenient location, making sure the unit and all
cables are more that 3 feet beyond the baby's farthest reach. Aim the
lens at the intended observation area (baby crib or playpen, etc.)
F ig . 4
button to turn on the camera. The LED on the
seconds to turn off the camera.
F ig . 3
button for approximately 3
9